• A leatherworking tool set on a wooden workbench, featuring a welt mill resting on a dark metal anvil and a brass-and-wood grater block, with a blurred workshop background.
  • Wet Mill showing stepped metal brass plate mounted on a wooden oak base with white background
  • Wet Mill showing metal brass plate mounted on a base with white background
  • A close-up of a leatherworking tool called welt mill showing brass plate mounted on a wooden oak base. Set on a wooden workbench with leatherworking tools hanging in the background.
1 4

Mukshy

Handmade Shoemakers Welt Mill for Thinning Leather welts

Handmade Shoemakers Welt Mill for Thinning Leather welts

£15.00 GBP
£25.00 GBP £15.00 GBP
Sale Sold out
Tax included. Shipping calculated at checkout.

Handmade brass welt mill used for thinning wet leather welts to a required thickness ranging from 3 to 5mm. Used by shoemakers, cobblers, leathercraft enthusiasts, and DIY shoe repair.

  • Made in England by a shoemaker with 20 years of experience
  • Materials: brass channel mounted on an oak wood base
  • Dimensions: 120 × 25 × 25mm
  • 9-step taper from 5mm down to 3mm
  • Accepts welts up to 20mm wide

How to use the welt mill

  1. Secure the welt mill on your left knee using the leather stirrup strap, held in place with your left foot.
  2. Select the brass step that corresponds to the welt thickness required.
  3. Place the 20mm leather welt into the brass channel, grain side facing down.
  4. Rest a sharp broad blade on the selected inclined brass step.
  5. Gradually pull the leather welt through to create an even, uniform thickness.
  6. Repeat across all nine positions to achieve thicknesses from 3mm to 5mm.
View full details